Help diagnosing and resolving vibrating MK3S+
Oddly enough, this just started after updating the firmware. It's also worth noting the printer sat about a month between uses. No other changes have been made. Printer is completely stock.
The three common reasons for prints suddenly failing after a printer has been unused for a while:
A dirty print bed. Give it a really thorough clean and avoid touching the print area.
Damp filament. Look up threads here about drying filament especially if it has been left open.
And - this is where you might start:
General neglect, dust and cobwebs... Basic cleaning, lubrication and general maintenance have all been missed.
See: https://help.prusa3d.com/en/article/i3-printers-regular-maintenance_2072
https://help.prusa3d.com/guide/maintenance-tips_23200
Cheerio,