Avisos
Vaciar todo

[Resuelto] BTT and Raspberry Pi upgrade.  

  RSS
Glenn Sturley
(@glenn-sturley)
Miembro
BTT and Raspberry Pi upgrade.

Hi All, Can anyone tell me the brand and type of motor connectors that are used on the Rambo 1.3 board. The sockets have a cutout one side that is used by the plug to lock the connector in place.

I am trying to interface the board to the BTT SKR Mini control board and then use the Raspberry Pi Zero 2W to the hard work. I have looked in lots of places but don't seem to be able to find the exact detail.

 

Respondido : 29/04/2024 6:56 am
Glenn Sturley
(@glenn-sturley)
Miembro
Topic starter answered:
RE: BTT and Raspberry Pi upgrade.

Hi All,

I have answered my own question. The Rambo 1.3a board uses Molex Connectors and the BTT Mini E3V3 uses JST variety.

That problem is solved!

Respondido : 15/07/2024 12:22 am
Compartir: