Notifications
Clear all
BTT and Raspberry Pi upgrade.
Hi All, Can anyone tell me the brand and type of motor connectors that are used on the Rambo 1.3 board. The sockets have a cutout one side that is used by the plug to lock the connector in place.
I am trying to interface the board to the BTT SKR Mini control board and then use the Raspberry Pi Zero 2W to the hard work. I have looked in lots of places but don't seem to be able to find the exact detail.
Posted : 29/04/2024 6:56 am
Topic starter
answered:
RE: BTT and Raspberry Pi upgrade.
Hi All,
I have answered my own question. The Rambo 1.3a board uses Molex Connectors and the BTT Mini E3V3 uses JST variety.
That problem is solved!
Posted : 15/07/2024 12:22 am