Notifications
Clear all
Footer MK4&MMU3 showing wrong Material
Hi all,
Using MK4 & MMU3. Slot 1-4 loaded with PLA for standard usages, slot 5 for changing needs.
Currently I‘m using PET. Chose slot 5 in Prusa Slicer, actual G-code parameters are obviously correct (240/85-90C). When started printing beeing asked if material PETG was correct, pressed ok/print. Printed all well. But the footer wanted me making believe, it‘s PLA. Restarted procedure twice.
That‘s obviously a minor bug in the firmware. Firmware 6.0.0, PS 2.7.4.
Publié : 12/05/2024 11:04 am