Notifications
Clear all

Support for 0.25 / 0.6mm nozzles  

  RSS
Fookatchu
(@fookatchu)
Active Member
Support for 0.25 / 0.6mm nozzles

Hi!
Does anyone have experience with different nozzle sizes than 0.4mm on the MMU2? To the best of my knowledge there shouldn't be any limitations regarding the nozzle, but Slic3r PE does not have a printer configuration for this. I didn't find any info on this in the manual or here.

Napsal : 08/11/2018 6:41 pm
Share: