[Zamknięte] Successful MMU2 prints  

Re: Successful MMU2 prints

Speaking of solubles,

20181212_094258.jpg

any chance of a link to that soluble test ball in a cage?

Re: Successful MMU2 prints

https://www.thingiverse.com/make:576601

Re: Successful MMU2 prints

moderate success?

So this was created on a MMU2 (not pallete) but i used the Mosaic files.
the gears turn after it soaked in water for about 12 hours and i had to manually use a knife to get into all the areas where the soluble would not desolve on its own.

the Soluble lifted and caused some issues. there is still some contamination of the BVOH into PLA

i had to create a complex Slic3r setup to make it work.
the pallete files give you a soluble shape in the model but you cannot use it with slic3r as it will screw up the top and bottom layers between the PLA and BOVH areas.

i had to add a bunch of rules to the settings on each piece of the model.

the gears did not form 100% due to the soluable lifting and again there is still a weak spot in the PLA from the BOVH interface.

changes: i increased the Purging another 20mm for load and unload on the BVOH.
changes to lower speed again on supports increase BVOH temps to 210.

so it isn't 100% where i would of liked this to come out but it does work.

Re: Successful MMU2 prints

This model is fascinating 😀

Re: Successful MMU2 prints

got mine done

Re: Successful MMU2 prints

Grispy Belt (One Print Zero Assembly)

Re: Successful MMU2 prints

Outstanding trapped ball. What was your experiences with pva? Any tips to share?

Re: Successful MMU2 prints

Welcome Lion

Re: Successful MMU2 prints

Penguin

Schrodinky Wizard money box

https://cults3d.com/en/3d-model/art/schrodinky-british-shorthair-cat-in-a-box-3d-printable-multi-part-model-multi-extrusion-package

3 separate print jobs, total 66 hours

Fillamentum: Red Purple, Noble Blue
Prusament: Azure Blue, Ms Pink, Silver, Galaxy Black
Prastika Trcek: White

Peter

Re: Schrodinky Wizard money box

Fillamentum: Red Purple, Noble Blue
Prusament: Azure Blue, Ms Pink, Silver, Galaxy Black
Prastika Trcek: White

I see a huge MMU2 issue. The printer made pink eyes instead of Green-Black. 😆
Very nice print btw!

Re: Successful MMU2 prints

Look, who was smiling at me today:

Re: Schrodinky Wizard money box

IMG_20181226_161850.jpg

https://cults3d.com/en/3d-model/art/schrodinky-british-shorthair-cat-in-a-box-3d-printable-multi-part-model-multi-extrusion-package

3 separate print jobs, total 66 hours

Fillamentum: Red Purple, Noble Blue
Prusament: Azure Blue, Ms Pink, Silver, Galaxy Black
Prastika Trcek: White

Peter

Holly molly - This guy is always moving the goal post, I have no choice but to kneel b4 you Master PJR ...... You are the undisputed world heavy weight champion, a The true Jedi Master of MMU

Re: Schrodinky Wizard money box

Holly molly - This guy is always moving the goal post, I have no choice but to kneel b4 you Master PJR ...... You are the undisputed world heavy weight champion, a The true Jedi Master of MMU

Thank you, kind sir. 😀

Moving on now to test a new extruder/sensor setup 😉

Peter

Re: Successful MMU2 prints

Received my MMU1->MMU2 upgrade kit last week. Spent Saturday converting my MK2S/MMU1 to an MK3/MMU2. Started my first print Sunday morning and except for a slight under extrusion it was a huge success...

I then started my next, a 2 color sheep at 50% size. I could have increased my purge from 210 to 220 to completely eliminate the black bleed through but it is hardly notieable.

Re: Successful MMU2 prints

Yet another "Schrodinky" cat money box (by Loubie), this time with a shiny "silk" PLA cat.

Peter

Re: Successful MMU2 prints

that the silk bronze? the silk copper looks kick ass

Re: Successful MMU2 prints

that the silk bronze? the silk copper looks kick ass

Yes, the bronze. But the whole thing is covered with Moire pattern 🙁

Peter

Re: Successful MMU2 prints

that bronze stuff is neat. by mistake I ordered 2 rolls. gave me a reason to use it allot. but the copper is very very cool. even the start of the purge block looks cool

Re: Successful MMU2 prints

that bronze stuff is neat. by mistake I ordered 2 rolls. gave me a reason to use it allot. but the copper is very very cool. even the start of the purge block looks cool

I could not find the correct settings to make it work with multiple filaments though, and I also noticed that it leaves a "glue-stick-like" deposit on the bed, presumably from the "shiny" additives. It also smelt different while printing, so it worries me just how safe to use it is. I also wonder what that deposit is doing to the inside the nozzle.

Peter