Notifications
Clear all
Assigning a different filament to infill doesn’t work anymore
I used to be able to do this-with Slic3r, mk3 and mmu2 but not anymore with prusaslicer, mk3s and mmu2s. If I expand the object to display infill, the extruder property (#) is greyed out.
Napsal : 15/06/2019 11:04 pm
RE: Assigning a different filament to infill doesn’t work anymore
Do a forum search, someone else had this issue recently and the answer was something to do with using the correct extruder.
Napsal : 18/06/2019 7:01 am
RE: Assigning a different filament to infill doesn’t work anymore
Here's the controls ...
Napsal : 18/06/2019 7:13 am
Topic starter
answered:
RE: Assigning a different filament to infill doesn’t work anymore
Thanks for the help; I hadn't gone"deep" enough trying to assign the extruder. Incidentally, I did do a search, but didn't come up with anything useful. Your screen shot was useful; I kept clicking until I could match it.
Napsal : 18/06/2019 8:27 pm