Assigning a different filament to infill doesn’t work anymore
 
Notifications
Clear all

Assigning a different filament to infill doesn’t work anymore  

  RSS
PeterT
(@petert)
Eminent Member
Assigning a different filament to infill doesn’t work anymore

I used to be able to do this-with Slic3r,  mk3 and mmu2 but not anymore with prusaslicer, mk3s and mmu2s. If I expand the object to display infill, the extruder property (#) is greyed out. 

Posted : 15/06/2019 11:04 pm
--
 --
(@)
Illustrious Member
RE: Assigning a different filament to infill doesn’t work anymore

Do a forum search, someone else had this issue recently and the answer was something to do with using the correct extruder.  

Posted : 18/06/2019 7:01 am
--
 --
(@)
Illustrious Member
RE: Assigning a different filament to infill doesn’t work anymore

Here's the controls ...

Posted : 18/06/2019 7:13 am
PeterT
(@petert)
Eminent Member
Topic starter answered:
RE: Assigning a different filament to infill doesn’t work anymore

Thanks for the help;  I hadn't gone"deep" enough trying to assign the extruder. Incidentally, I did do a search, but didn't come up with anything useful. Your screen shot was useful; I kept clicking until I could match it.

Posted : 18/06/2019 8:27 pm
Share: