Rotation of pulleys during printing?

Letzter Beitrag

RSS

Hermanos de fi...

(@hermanos-de-filamento)

New Member

Rotation of pulleys during printing?

I have seen that in my MMU2 the pulleys rotate for loading and unloading the filament, until this point is everything correct, however during printing, the pulleys don't rotate, so the filament is only load by the motor that has in the extrusor. Is it behaves normally? Or something is wrong?

Veröffentlicht : 02/01/2022 9:32 pm

K7ZPJ

(@k7zpj)

Reputable Member

RE: Rotation of pulleys during printing?

Your MMU2 is working normally. Nothing is wrong.

Posted by: @hermanos-de-filamento

I have seen that in my MMU2 the pulleys rotate for loading and unloading the filament, until this point is everything correct, however during printing, the pulleys don't rotate, so the filament is only load by the motor that has in the extrusor. Is it behaves normally? Or something is wrong?

Veröffentlicht : 03/01/2022 1:31 am

Forums-Statistiken

559 Foren

63 K Themen

443.5 K Beiträge

20 Online

67.9 K Mitglieder

Letzter Beitrag: Prusa to Printed Solid ........... Thought it would be good Unser neuestes Mitglied: etiennep Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen