Benachrichtigungen
Alles löschen

MMU2.0 Video Anytime Soon? Anyone?  

Seite 1 / 2
  RSS
Olef
 Olef
(@olef)
Prominent Member
MMU2.0 Video Anytime Soon? Anyone?

I couldn't resist posting something in here to fend off the tumbleweed. Not much to discuss yet is there?

Is there any hope of a video of the new MMU2.0 in operation yet? At least it would give us something to talk about 💡

Veröffentlicht : 01/05/2018 12:45 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: MMU2.0 Video Anytime Soon? Anyone?

Hi Alfred,

from the photo's so far, the V2 seems to be very similar to my mmu V1 pretty much a paperweight... 😈

I too would like some moving images to make me drool...

for that matter, I would also like to receive my mk2.5 upgrade too!

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Veröffentlicht : 01/05/2018 4:59 pm
Steve
(@steve)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?


I too would like some moving images to make me drool...

for that matter, I would also like to receive my mk2.5 upgrade too!

Hear, hear!

XL (5T) / MK4 / MK3S+-MMU3 / MK3S / MK2.5S-MMU2S / Mini / SL1S

Veröffentlicht : 01/05/2018 9:22 pm
spark
(@spark)
Reputable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

Hi guys,
While waiting on my MK2.5, I've been looking hard and long at the MMU2. I was wondering how the ingest filament lines would feed into MMU2 and how Prusa Research intends to deconflict with moving print cables? The way I see it, they will collide.

MK2S kit owner since 8/15/2017

Veröffentlicht : 02/05/2018 2:46 am
Joe Prints
(@joe-prints)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

The only thing I have seen is Tom's MRRF video where he shows the mmu2.0 "revolver"

around the 2:42 mark

Anything can be made better
https://www.myminifactory.com/users/Joe%20Prints

Veröffentlicht : 02/05/2018 2:48 am
Jeff
 Jeff
(@jeff-19)
New Member
Re: MMU2.0 Video Anytime Soon? Anyone?

I agree. Considering it's supposed to start shipping at the end of this month, it would be nice to see some detailed video of the MMU 2.0 in action.

-Jeff

Veröffentlicht : 02/05/2018 11:24 pm
Crunch
(@crunch)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

so the mmu2 it should start shipping at the same time the powder coated build sheets are due?

The Latest Firmware can be found here https://github.com/prusa3d/Prusa-Firmware/releases
Open Firmware Issues https://github.com/prusa3d/Prusa-Firmware/issues

Veröffentlicht : 02/05/2018 11:55 pm
Olef
 Olef
(@olef)
Prominent Member
Themenstarter answered:
Re: MMU2.0 Video Anytime Soon? Anyone?


so the mmu2 it should start shipping at the same time the powder coated build sheets are due?

Hmmmm.......

Veröffentlicht : 03/05/2018 9:15 am
ntdesign
(@ntdesign)
Reputable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

Evil bastards 😀

It's kind of surprising nobody is bulk-selling MK3-sized spring steel sheets on ebay yet. Seems like a great way to make 10 USD out of 30 cents if you have a waterjet or good lasercutter. I'd definitely buy a few, too lazy to source locally.

Veröffentlicht : 03/05/2018 10:47 am
kursat.u
(@kursat-u)
Eminent Member
Re: MMU2.0 Video Anytime Soon? Anyone?

Apparently, there will be a showing of the MMU2 for the first time at the Maker Faire, San Francisco Bay Area this weekend.
https://www.facebook.com/events/345923252593182/
I'll be going and hope to see something that works very well and close to a finished, well engineered product.
I am using MK2S+MMU1 almost every day nowadays, for more than a year now and it works quite well for me now. Multi material printing is essential for me (mostly for supports).
But I was (still a bit) dissatisfied with MMU1 because of the time I had to spend to use it, limitations due to the design
and complete lack of improvements after launch.

Some of the improvements (from simple ones to complicated ones) that might have undertaken are
1- Hotend fan shroud, silent fan, took me a while to find a good one which I still had to modify because very limited MMU1 usage.
2- Better temperature adjustment during filament switch.
3- Better variety of spool holders, one design does not work for all.
4- Decreasing filament switch failures
5- Printing with wider range of filament types
6- Decreasing the filament switch time and/or print time
7- Decreasing the wasted filament due to the switch

We'll see if MMU will achieve some of these.

Veröffentlicht : 17/05/2018 1:33 am
Dewey79
(@dewey79)
Honorable Member
Re: MMU2.0 Video Anytime Soon? Anyone?


Apparently, there will be a showing of the MMU2 for the first time at the Maker Faire, San Francisco Bay Area this weekend.
https://www.facebook.com/events/345923252593182/
I'll be going and hope to see something that works very well and close to a finished, well engineered product.

We'll see if MMU will achieve some of these.

I was thinking of going, but I can't get away. Hope it works well and you have a good in depth talk with them. Let us know....

Veröffentlicht : 17/05/2018 4:51 am
Peter L
(@peter-l)
Honorable Member
Re: MMU2.0 Video Anytime Soon? Anyone?


I'll be going and hope to see something that works very well and close to a finished, well engineered product.

Please post an update with what you see. I am also hoping you see a finished, well-engineered product, since the Prusa website still says they're supposed to start shipping at the end of May, which is only two weeks away.

Veröffentlicht : 17/05/2018 3:59 pm
PJR
 PJR
(@pjr)
Antient Member Moderator
Re: MMU2.0 Video Anytime Soon? Anyone?


since the Prusa website still says they're supposed to start shipping at the end of May, which is only two weeks away.

Last time I looked it said July...

"Available to preorder! Shipping starts in July 2018, new orders in October 2018! (Separate orders recommended)"

Peter

Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…

Veröffentlicht : 17/05/2018 4:46 pm
maxx78
(@maxx78)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

It seems they pulled a classical "Prusa"...
when i ordered it stated "shipping starts end of May, New Orders starts in June" (I ordered shortly after the annoucement).

So there seems to be a delay.

It happens but it annoys me every time that they don't send an information of the delay to the people who have ordered. 👿

Veröffentlicht : 17/05/2018 5:36 pm
Tomaz
(@tomaz)
Eminent Member
Re: MMU2.0 Video Anytime Soon? Anyone?


It seems they pulled a classical "Prusa"...
when i ordered it stated "shipping starts end of May, New Orders starts in June" (I ordered shortly after the annoucement).

just stop throwing money at them ... it would be time already that they finish something first and then take the money ❗

Veröffentlicht : 17/05/2018 8:36 pm
Crunch
(@crunch)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?

here is a competitor to the MMU2 looks similar and is designed for the prusa printer. looks like it uses only 2 motors and there's talk of up to 10 filaments https://www.reddit.com/r/3Dprinting/comments/8e3dz9/protea_designs_selectra_5_looks_amazing/

https://www.facebook.com/proteadesign.co/

The Latest Firmware can be found here https://github.com/prusa3d/Prusa-Firmware/releases
Open Firmware Issues https://github.com/prusa3d/Prusa-Firmware/issues

Veröffentlicht : 17/05/2018 8:48 pm
digibluh
(@digibluh)
Reputable Member
Re: MMU2.0 Video Anytime Soon? Anyone?


here is a competitor to the MMU2 looks similar and is designed for the prusa printer. looks like it uses only 2 motors and there's talk of up to 10 filaments https://www.reddit.com/r/3Dprinting/comments/8e3dz9/protea_designs_selectra_5_looks_amazing/

https://www.facebook.com/proteadesign.co/

Ysplitter? no cutter for the bulb? it' is geared? looks like it will face similar jamming issues as MMU V1.

Veröffentlicht : 18/05/2018 3:30 pm
jason.k24
(@jason-k24)
Eminent Member
Re: MMU2.0 Video Anytime Soon? Anyone?

Lack of videos doesnt make me hopefully for on time shipping...is it even slated for late may anymore? I havent seen a single word in awhile.

Veröffentlicht : 19/05/2018 4:25 pm
x50arm
(@x50arm)
Estimable Member
Re: MMU2.0 Video Anytime Soon? Anyone?


Lack of videos doesnt make me hopefully for on time shipping...is it even slated for late may anymore? I havent seen a single word in awhile.

Nope, moved to July: Available to preorder! Shipping starts in July 2018, new orders in October 2018! (Separate orders recommended)

Veröffentlicht : 19/05/2018 10:15 pm
digibluh
(@digibluh)
Reputable Member
Re: MMU2.0 Video Anytime Soon? Anyone?



Lack of videos doesnt make me hopefully for on time shipping...is it even slated for late may anymore? I havent seen a single word in awhile.

Nope, moved to July: Available to preorder! Shipping starts in July 2018, new orders in October 2018! (Separate orders recommended)

Lets just say it's real date is october sometime to keep expectations low.

Veröffentlicht : 19/05/2018 11:43 pm
Seite 1 / 2
Teilen: