Benachrichtigungen
Alles löschen

Calibration assistance for MMU2  

  RSS
phantomkingx
(@phantomkingx)
Active Member
Calibration assistance for MMU2

What would really help is a fast and easy way to test ramming settings for each filament. Maybe on the ramming customization screen have a button that creates the gcode that does a load/unload cycle and reveals the filament tip afterwards. There may need to be additional inputs like extruder temperature and which extruder to use. Since ramming calibration is a major factor in having the MMU work properly something like this will help enable the user to tune their system.

Additional thought
Since ramming is configured per filament, temperature doesn't need to be an input, but identifying which extruder would still be useful instead of assuming #1 as an alternative. A use case would be before a 5 color 40 hour print, the user double checks the ramming settings for all five filaments in whatever bank they are loaded in.

Veröffentlicht : 20/10/2018 12:12 pm
nuroo
(@nuroo)
Reputable Member
Re: Calibration assistance for MMU2

sounds like an good idea..... especially since there's isnt an official ramming guide.

Prusa MK3 preassembled (R2/B6) > (R3/B/7)
Prusa MK2.5 kit > MK3 > MK3+MMU2 (R3/B/7) 😀
Prusa SL1 3D printer + Curing and Washing Machine (day1 order)
Taz6
CR10s4
Delta 3ku

Veröffentlicht : 20/10/2018 5:53 pm
Teilen: