Upgrade power supply for Meanwell ERPF-400-24
Hi,
I will be printing a fair bit of PCCF/PC and looking for a bigger psu so my psu doesn't run at max all the time. The maxwell ERPF-400-24 is fairly cheap and wondering if I didn't overlook something to get that much power for this price. https://www.digikey.ch/product-detail/en/mean-well-usa-inc/ERPF-400-24/1866-5173-ND/7703222 .
Any advice ?
Regards
Vincent
mean well
I can't wait to hear about your results. I have two meanwells but not that one.
--------------------
Chuck H
3D Printer Review Blog
PSU working very well
Hi,So I got the PSU, work very well. It's running a bit hot sometimes. I have a large Noctua A20 fan I am not using so I am ripping apart the case of the PSU to adapt the Fan into it. Will see how it go.
Vincent
RE: images
Please post images of your end results.
Hi,So I got the PSU, work very well. It's running a bit hot sometimes. I have a large Noctua A20 fan I am not using so I am ripping apart the case of the PSU to adapt the Fan into it. Will see how it go.
Vincent
--------------------
Chuck H
3D Printer Review Blog