Notifications
Clear all

MK3S Mosquito integration  

Strona 18 / 20
  RSS
cwbullet
(@cwbullet)
Member
RE: MK3S Mosquito integration

@christoph-e5

They also sell a knockoff of the Mosquito.  I have a real Magnum and a Knock off regular.  They print great.  I use the socks and they also work well.  5 thumbs up.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 05/11/2019 1:23 pm
Bunny Science
(@bunny-science)
Noble Member
RE: MK3S Mosquito integration

The cloned Mosquito also adds a clamped arrangement for the heater cartridge. I am not a fan of the original's loose fit, but pack the gap with boron nitride scheme. On my original Mosquito, I tighten the gap with a brass shim.

I really like the clone's clamping screw. You can still use the boron nitride as thermal compound, and gain the ability to reduce the gap.

Your clone is working well?

 

 

Opublikowany : 05/11/2019 5:49 pm
ed
 ed
(@ed-3)
Reputable Member
RE: MK3S Mosquito integration

Have a link to the clone? I don’t see it on TL

Opublikowany : 05/11/2019 6:03 pm
Bunny Science
(@bunny-science)
Noble Member
RE: MK3S Mosquito integration

The one I found was not by TL, but rather "Mellow"

https://www.aliexpress.com/item/4000088018308.html

Don't know if this is the same that Charles is testing.

Opublikowany : 05/11/2019 6:08 pm
cwbullet
(@cwbullet)
Member
RE: MK3S Mosquito integration
Posted by: @guy-k2

The one I found was not by TL, but rather "Mellow"

https://www.aliexpress.com/item/4000088018308.html

Don't know if this is the same that Charles is testing.

I have been printing with these for 4 months or so.  They work as well as the E3D in my book.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 05/11/2019 6:16 pm
ed
 ed
(@ed-3)
Reputable Member
RE: MK3S Mosquito integration

You mean the slice engineering correct?  Might have to give a try

Opublikowany : 05/11/2019 7:05 pm
ACE
 ACE
(@ace-2)
Trusted Member
RE: MK3S Mosquito integration

@charles-h13 which thermistor do you use with the mosquito clone? Original slice or something different? 

Opublikowany : 05/11/2019 8:09 pm
cwbullet
(@cwbullet)
Member
RE: MK3S Mosquito integration
Posted by: @christoph-e5

@charles-h13 which thermistor do you use with the mosquito clone? Original slice or something different? 

I ordered one off AliExpress - not sure of which one.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 05/11/2019 9:21 pm
cwbullet
(@cwbullet)
Member
jmone
(@jmone)
Reputable Member
RE: MK3S Mosquito integration

Thanks - I got a clone of the "Magnum" to compare to the original.  I'll be interested to see what the Heat Break Insulator is like as I've always broken the genuine slice one.

 

I'd also ordered the socks on the weekend after stumbling across them.

Opublikowany : 05/11/2019 11:10 pm
cwbullet
(@cwbullet)
Member
Bunny Science
(@bunny-science)
Noble Member
RE: MK3S Mosquito integration

That leaves just an equivalent high temp thermistor to find. Not much point doing a Mosquito (clone) without also installing a thermistor that can tolerate high temps. 

Those TL socks say 290C. My Permatex Copper is supposed to be good to 371C

This post was modified 5 years temu by Bunny Science
Opublikowany : 06/11/2019 12:52 am
cwbullet
(@cwbullet)
Member
rmm200
(@rmm200)
Noble Member
RE: MK3S Mosquito integration

Let us know how that heater works out. I have to say the AliExpress page looks really good...

Opublikowany : 06/11/2019 12:54 am
Bunny Science
(@bunny-science)
Noble Member
RE: MK3S Mosquito integration

Maybe this one https://www.aliexpress.com/item/4000275489841.html

😀we are posting at near same

This post was modified 5 years temu by Bunny Science
Opublikowany : 06/11/2019 12:59 am
Bunny Science
(@bunny-science)
Noble Member
RE: MK3S Mosquito integration

BTW, you cannot solder to the leads of the Slice Engineering thermistor. I discovered that when I clipped off the connector of my original.

Had to do crimp connections. I don't recommend that unless you have good, small pin, crimping tools.

Opublikowany : 06/11/2019 1:03 am
rmm200
(@rmm200)
Noble Member
RE: MK3S Mosquito integration

JST XH connectors big enough - or need something else? I just got set up to make hundreds of those...

And what do you do with the heater cable?

Opublikowany : 06/11/2019 2:47 am
jmone
(@jmone)
Reputable Member
RE: MK3S Mosquito integration
Posted by: @guy-k2

My Permatex Copper is supposed to be good to 371C

Mmmm that is almost enough to give PEEK another go....

Opublikowany : 06/11/2019 3:03 am
cwbullet
(@cwbullet)
Member
RE: MK3S Mosquito integration
Posted by: @guy-k2

Maybe this one https://www.aliexpress.com/item/4000275489841.html

😀we are posting at near same

That is the one/  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 06/11/2019 3:30 am
jmone
(@jmone)
Reputable Member
RE: MK3S Mosquito integration

Mmmm my Mosquito Magnum (sans heat shield) has started to leak somewhere around the heat break / hot block (will disassemble once the print finishes).  Has been fine for months.  Anyone else had issues?

Thanks

Nathan

Opublikowany : 15/11/2019 4:10 am
Strona 18 / 20
Share: