Notifiche
Cancella tutti
magnetic 3d printing bed brace
I was having trouble with tall prints coming detached from the print bed so I designed this magnetic 3d printing bed brace.
You can see it in action here:
and you can get it here: https://www.thingiverse.com/thing:4062532
Postato : 22/12/2019 11:41 pm
RE: magnetic 3d printing bed brace
Align model in the Y-direction.
Use a big brim , attached to the model. Make brim very big.
Use glue stick.
Clean bed very good, is needed for holding model.
Print first layer slower and hotter to get better sticking power.
This is normally enough.
Postato : 24/12/2019 8:58 pm
RE: magnetic 3d printing bed brace
While the stock build surface is good, I have had better luck with the PEI flex plate from www.3DMakerEngineering.com
Give it a try and let me know what you think!
Postato : 06/01/2020 8:49 pm