Trouble with ColorPrint

Last Post

RSS

Bdtry

(@bdtry)

Active Member

Trouble with ColorPrint

So I am trying to add some color changes to a model (for the first time) but there is a problem with the layer heights in ColorPrint itself.

I sliced it with the first layer at 0.2 and each other layer is 0.15. For some reason when I upload the STL to ColorPrint it will list the layers as 0.2, 0.35, 0.5, 0.65, 0.8, 0.95, 1.1, 1.6..... whut? 😯

For some reason it is telling me there is a 0.5mm layer there and it is screwing up ever single layer height to come after. I try to enter the correct layer height manually but it will auto adjust my numbers to the next closest layer height it thinks it should be. When I sliced the model and previewed the layers in Slic3r the layers all come out to the correct heights which is how I found out where I wanted the changes.

Posted : 14/05/2017 7:26 am

PJR

(@pjr)

Antient Member Moderator

Re: Trouble with ColorPrint

Are you slicing with Z-Lift/Z-Hop ?

Peter

Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…

Posted : 17/05/2017 11:44 am

tim.h3

(@tim-h3)

Active Member

Re: Trouble with ColorPrint

It looks to me like the colorprint site is broken. Maybe related to the addition of the multi-material selection.
I can load a gcode and set layer changes, but when I select download, nothing happens.
I've used it successfully in the past.
Anyone else having problems?

Tim