Notifications
Clear all

Prusa control not generating  

  RSS
PedalDoc
(@pedaldoc)
Trusted Member
Prusa control not generating

if I import my stl and don't modify it I just take standard settings it will generate gcode no issues.
if I flip it 180 across Y-correct print aspect, it will generate.
but if I flip it 180, change to 0.3 and more than 20% infill it hangs at 10%
can't figure out how to upload stl to provide example

Opublikowany : 08/03/2018 3:24 am
Share: