Notifiche
Cancella tutti

small extruder temperature jumps  

  RSS
muffu
(@muffu)
New Member
small extruder temperature jumps

hi,
if i set the nozzle temp to 205 °C, the temperature jumps during the print from approximately 201°C to 209 °C.
it's like the board reads the temperature too rarely. anyone an idea?

regards,
michael

Postato : 22/07/2017 11:38 pm
Martin
(@martin-15)
Eminent Member
Re: small extruder temperature jumps

Hi,

I had temperature variations of +/- 5 degrees after building my printer. I found tuning the PID settings as explained here http://help.prusa3d.com/mk2-firmware/pid-tuning-hotend made them to become very stable with hardly any fluctuations after plugging in the new PID settings.

Postato : 23/07/2017 12:46 am
muffu
(@muffu)
New Member
Topic starter answered:
Re: small extruder temperature jumps

works great, thank you 😎

Postato : 24/07/2017 3:56 pm
Condividi: