Notifications
Clear all
How to Test Extruder Fan [SOLVED]
I think my fan is not working so I am looking for advice on the best way to test it? I have tried using the OctoPrint Control tab to turn on/off but it does not turn on.
Thanks!
Publié : 20/06/2015 5:04 pm
Re: How to Test Extruder Fan
The fan should start spinning when the nozzle reaches 50°C. This one is not controllable by fan settings, it is setup in the firmware.
Founder and owner / Majitel a zakladatel
Publié : 21/06/2015 2:47 pm
Topic starter
answered:
Re: How to Test Extruder Fan
That is not good then. My fan does not start.
Publié : 21/06/2015 4:16 pm
Topic starter
answered:
Re: How to Test Extruder Fan
After checking the connection to the motherboard I reseated the line and it now works!!
😀
Publié : 21/06/2015 5:19 pm