Avisos
Vaciar todo

Compressing print  

  RSS
Don
 Don
(@don-4)
Active Member
Compressing print

I have a strange to me situation. I'm printing something and about 1.5 to 2 CM high the print compresses the layers and finally unseats the print. The first 1CM of the print is perfect. I have the Live Z adjusted nicely. Could this be a hardware issue? Thanks. Trying to print Baby Groot! This has also happened with a printed spool.

Respondido : 10/05/2017 5:18 am
David T.
(@david-t)
Noble Member
Re: Compressing print

Any pictures?

Respondido : 10/05/2017 9:28 am
Don
 Don
(@don-4)
Active Member
Topic starter answered:
Re: Compressing print

Some bozo set my extrusion multiplier to 1.2 in my slicer. Should have been 0.9. If I ever catch him I'm going to call the cops. 🙂 🙂
Sorry. The print is coming out much better but "Little Groot" likes to jump off the heat bed when he is only half printed. I'm going to apply some Elmers glue stick tomorrow and give it a go

Respondido : 10/05/2017 11:17 am
Compartir: