Benachrichtigungen
Alles löschen
Benchy printed, tips for improvement wanted
Prusa i3 mk2s
Sliced with Cura, default settings, 0.2mm, no supports. Using black PLA
Any suggestions?
print temp 200
plate temp 60
flow 100%
layer height 0.2mm
print speed 60 mm/s
travel speed 120 mm/s
print cooling enabled
skirt build plate adhesion
infil 20%, grid, layer thickness 0.2
Veröffentlicht : 26/10/2017 12:52 am