Notifications
Clear all

Stringy print when printing 0.05mm layers  

  RSS
robbert.g
(@robbert-g)
Eminent Member
Stringy print when printing 0.05mm layers

Hi all,

I have been printing a lot and testing a lot with different brands of PLA. I dialed in most of the right extrusion multipliers for the different brands I use.
For example, I have a PLA for which I use a EM of 0.89 and prints come out great.

Except when I use the 0.05mm DETAIL MK3 preset. The print comes out all stringy and has a lot of rough edges.
What could be the cause of this?

I use the preset supplied in the 2.1.3 drivers.

Posted : 14/01/2018 3:51 pm
Share: