Slic3r Wall settings for Vase
Hello everyone,
I need a little help from the experts.
I'm trying to print this:
http://www.thingiverse.com/thing:481259
The shape gets printed out very well but the inner wall is not leakproof.
The inner wall has tiny holes in it.
I've trying to print this with the following:
i3 MK2
PLA Esun black
220 First layer
215 rest layers
55C heatbed
0.15 optimal preset with 0.4 Nozzle
Having checked all the slic3r quality boxes besides: Avoid crossing perimeters.
I've also tried the Spiral Vase option but didn't work out great, maybe i'm doing something wrong.
Can anyone guide me in the right direction please?
Greetings
Florian
Re: Slic3r Wall settings for Vase
I believe there is a know issue with spiral vase.
when printing something that needs to hold liquids, you may need to adjust the seam parameter and print at 0.5mm line width and at least 0.2mm layer height.
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…
Re: Slic3r Wall settings for Vase
Thank you very much Peter, I will try that.
Greetings
Florian