Notifications
Clear all
Quick tip for first layer, thin structure and very poor adhesion
I'd like to share my solution for very thin orthogonal structures where the filament won't stick at some spots, i.e. a profile shown in the attachment. Some filament types/colours have very different behaviours, so in my case the black generic PLA won't stick even if I clean my bed very, very carefully, whereas other colours i.e. white or orange have absolute no problems to stick. I've found out, that turning the object to print in a 45 degree angle can have a very positive effect, I think it has to do with the micro-fine structure of the smooth bed where the lines are oriented in a horizontal direction.
Maybe this tip can help you...
Posted : 27/10/2019 7:08 pm