Benachrichtigungen
Alles löschen
One directional 45° scratches or cracks at the rear seam
Hey,
I have an issue with cracks near the z-seam and I have no idea how to fix it. Maybe you might give me some tips?
As you can see in the picture, there are one-directional 45° cracks next to the rear seam of the object. If I print just one object per bed it's fine but when I print 4 per bed, sometimes there are those cracks at 1-2 objects.
- Material: PLA
- Nozzle: 0,6mm
- Temp: 200°C
- Speed (Outer perimeter): 80 mm/s
(By the way, the first layer is fine. For the picture I just put a printed object back on the bed.)
Veröffentlicht : 22/09/2023 5:43 am