Notifications
Clear all
Missing start after long travel
Printing with .6mm nozzle and .4mm height using stock profile for prusament pla I get what looks like slow start after a long travel.
what do I do for this.
thanks
This topic was modified 5 years temu 2 times by Gavin
Opublikowany : 07/10/2019 6:18 am
RE: Missing start after long travel
what was the print suppose to look like?
--------------------
Chuck H
3D Printer Review Blog
Opublikowany : 07/10/2019 9:45 am
RE: Missing start after long travel
what was the print suppose to look like?
--------------------
Chuck H
3D Printer Review Blog
Opublikowany : 07/10/2019 9:45 am
Topic starter
answered:
RE: Missing start after long travel
Here is a better pic which should make it clearer. Some external perimeters that start after a long travel seem to start extruding too late.
It’s not in the gcode.
This post was modified 5 years temu by Gavin
Opublikowany : 07/10/2019 10:30 am
Topic starter
answered:
RE: Missing start after long travel
Duplicate
This post was modified 5 years temu by Gavin
Opublikowany : 07/10/2019 10:31 am