Notifications
Clear all
flexible PLA
Hi guys,
I've recently got my hands on a spool of flexible PLA (1kg for approx. 22,5€). but I still have problems to get it "dialed" in, so that proper prints are possible.
I already reduced the print speed down to 30mm/s and the extrusion multiplier for overhangs/bridging down to 0.92, but I'm still not satisfied with the print quality.
it's the first time for me to print with flexible filament.
are there any further tips ?
dem inscheniör is' nix zu schwör...
Publié : 09/10/2017 1:27 pm