Thought i'd print something out live! The castle!
 
Notifications
Clear all

Thought i'd print something out live! The castle!  

  RSS
jonathan.h8
(@jonathan-h8)
Trusted Member
Thought i'd print something out live! The castle!

Wish me luck!
Just something for in between festive drinks!

Could all go horribly wrong (probably will)!
😀

Publié : 31/12/2017 7:42 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: Thought i'd print something out live! The castle!

what layer height?
Joan
mine took over 24 hours at 0.05mm on the old printer

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Publié : 31/12/2017 7:49 pm
jonathan.h8
(@jonathan-h8)
Trusted Member
Topic starter answered:
Re: Thought i'd print something out live! The castle!


what layer height?
Joan
mine took over 24 hours at 0.05mm on the old printer

Hey Joan, it's all at default settings straight off the SD card.

Publié : 31/12/2017 7:56 pm
ed
 ed
(@ed-3)
Reputable Member
Re: Thought i'd print something out live! The castle!

I’d rather watch this than Dick Clark’s rockin New Year🎉

Publié : 31/12/2017 8:12 pm
Impruve
(@impruve)
Estimable Member
Re: Thought i'd print something out live! The castle!


what layer height?
Joan
mine took over 24 hours at 0.05mm on the old printer

If its the original gcode sent with the printer it will take 9-10 hours

Publié : 31/12/2017 8:15 pm
jonathan.h8
(@jonathan-h8)
Trusted Member
Topic starter answered:
Re: Thought i'd print something out live! The castle!

Amazing!
Windows logged me out so we are on to the next video here...

Happy New Year and happy printing everyone!
(I’ll iron out problems as soon as I can).

Publié : 01/01/2018 12:48 am
jonathan.h8
(@jonathan-h8)
Trusted Member
Topic starter answered:
Re: Thought i'd print something out live! The castle!

So unfortunately Windows kept putting my machine to sleep, despite all the settings being set to prevent this.
Anyhow, the print worked out quite well. What do you think?

I'll fix the camera switching off issue next stream!

Let me know what you think of the print quality!
All default settings, straight off the SD card and no glue used on the bed.

Publié : 01/01/2018 10:44 am
Partager :