Notifications
Clear all

[Fermé] First line in front left corner  

  RSS
Cowen
(@cowen)
Active Member
First line in front left corner

When you print something the printer always starts by putting a line on the front left side. its a thin line followed by a thicker line.

The last month or so that line has become very uneven and i have no idea what to do to fix this.

My prints are fine its just that one line that used to be very even now looks like its stuttering the filament on.

I have tryed a new nozzle thinking it might have been clogged a little but its still the same.

I don't really have a problem with it as long as the prints are coming out fine, its just that i'd sleep better if i got it fixed or even knew what is causing it.

If you have had this and know a fix or the reason for it pls let me know.

Publié : 15/01/2020 9:56 am
rmm200
(@rmm200)
Noble Member
RE: First line in front left corner

That area is just for nozzle flush, to get out the old filament and get things flowing.

I really would not worry about how it looks.

Publié : 15/01/2020 5:42 pm
Partager :