Notifications
Clear all

[Closed] Just an idea  

  RSS
Cre8tive
(@cre8tive)
New Member
Just an idea

I have small failures that cost me my whole build (mostly operator error from me pushing my limits). Lets say your build consist of 4 individual parts. Lets say their numbered in the g-code (1-4). Part number 4 fails for whatever reason (didn't adhere good or supports didn't hold). If we could tune the printer during the print to ignore/disregard part 4 it could save everyone time, money on filament and save the parts that is printing perfect. Just a thought. Of course I could always take things a bit slower but I like to explore my capabilities 🙂

Napsal : 26/06/2020 2:53 am
jsw
 jsw
(@jsw)
Famed Member
RE: Just an idea

I've found that it's better to always print parts one at a time.

Napsal : 26/06/2020 4:10 am
Peter M
(@peter-m)
Noble Member
RE: Just an idea

You can print 1 model at the time(with more then 1 models), look for this, I forgot the name. Of course space on the bed is a problem.

 

Learn how to get models better sticking to bed is also a idea.

Clean bed with dish soap,

First layer should be 100%, better for sticking,

(first layer print hotter and slower, a bed a little hotter, normal not needed but could help),

Use glue stick, and not all glue stick is the same, do test different brands,

Use a big brim with big flat models, and small models with small foot print on bed.

Napsal : 28/06/2020 8:26 am
Share: