Avisos
Vaciar todo
Why are my prints inconsistent within the same print job with the same .stl?
I am using a Prusa MK3S with the MMU2. I calibrated the printer recently.
The print is using a .07 layer height with these speeds
Does anyone know why my prints are inconsistent?
This one that printed in the middle is perfect. Its exactly what I want.
This one printed on the bottom right of the sheet. The dark blue under extrudes everywhere.
This one is stringy looking on the light blue layers
This one the edges didnt form right
This picture show that all these prints, are printed on the same bed
Any help would be appreciated.
Respondido : 06/02/2020 5:35 pm
RE: Why are my prints inconsistent within the same print job with the same .stl?
Make sure you are using 7x7 bed leveling.
Respondido : 06/02/2020 5:48 pm
MattJMurphy me gusta
Topic starter
answered:
RE: Why are my prints inconsistent within the same print job with the same .stl?
@robert-rmm200
I just changed to 7x7. Ill try it now. Thanks for quick reply.
Respondido : 06/02/2020 7:04 pm
RE: Why are my prints inconsistent within the same print job with the same .stl?
Also - whatever you are spraying on the bed is quite uneven and probably not helping uniformity.
Respondido : 07/02/2020 6:17 am