Notifications
Clear all
Waves in first layers
What is causing these waves / ripples across my print bed? This is just on the bottom layers.
Publié : 06/05/2020 5:59 am
RE: Waves in first layers
Your first layer calibration is off. The nozzle is too close to the heat bed.
Publié : 06/05/2020 6:14 am
Topic starter
answered:
RE: Waves in first layers
Thank you ...
Sure enough, I dialed the live-z up (less negative) and as I got it higher, it went away.
Publié : 06/05/2020 2:28 pm