Notifications
Clear all
Voids with Corkfill
Could someone with more experience that me (i.e. everyone) give me an idea what might be causing these voids in my print?
ColorFabb Corkfill on an MK3, 0.60 nozzle. The general layer height is 0.10mm, but the infill - the area with the voids - is at 0.20 (S3D Infill => Combine Infill Every 2 layers).
Occasional temporary micro-clogs?
Simple under-extrusion?
... that's all I can think of ... Thanks for any suggestions!
-- Clint Goss
Posted : 08/05/2018 10:28 pm