Notifications
Clear all
vertical edges are round
hello
I have got problems with vertikal edges:
there seems to be too much material forming round edges.
Up to now, I couldn't find anywhere else this problem described and solved.
Any hint is welcome 😉
The part was sliced with slicer 1.39.2
settings were 0.20mm Fast MK3 (unmodified)
Material Original Prusa PLA
Ralf
Posted : 12/05/2018 5:43 pm
Re: vertical edges are round
this is why: https://help.prusa3d.com/l/en/article/t5w9VsdVai-linear-advanced
can't tell, but in the first pic it almost looks like you've got retractions happening right at the edge which won't help.
moral of story: slow those perimeters and acceleration values.
Posted : 13/05/2018 6:07 am
Topic starter
answered:
Re: vertical edges are round
Thank you Curtis,
Will work through the Infos.
Regards
Ralf
Posted : 13/05/2018 9:38 am
Topic starter
answered:
Re: vertical edges are round
Adjusting the "K"-value did the job:
shown result was reached with K=60 for PLA and 100% speed
Posted : 13/05/2018 3:52 pm