Notifiche
Cancella tutti
Trouble Printing Taulman Bridge Nylon filament
Hi, I've been trying to print with some Taulman Bridge Nylon filament on my MK3 but my hotend keeps getting clogged. I'm printing with recommended PrusaControl settings for Taulman Nylon, hotend at 255 and bed at 90. Shortly into the print the hotend gets plugged up. The nozzle isn't getting clogged, a plug forms in the hotend and filament will no longer pass through. I have to take the whole hotend apart and push out the plug and it'll be in there solid. I'm not sure whats going on, this is my first time printing with nylon.
Postato : 01/05/2018 2:33 pm