TPU Feeding Problems
Trying to print with TPU for the first time. Pretty much a novice with 3D printing in general but have printed a number of items in PLA and ABS.
Printing a phone case using Sainsmart TPU.
When I start the print, the printer goes through the normal bed leveling checks just fine. As it starts to print, extrusion is not as consistent as PLA or ABS. Biggest issue is that the printer stops after just a few passes, then commands to unload filament, then reload filament. It then goes back for a few more passes, then repeats the commands to unload and reload filament. After a few repeats of this, I cancelled the print.
I have good adhesion to the bed with no treatment.
Prusa Mk3
Slic3r
Appreciate any assistance
Re: TPU Feeding Problems
turn the filament sensor off!
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK