Avisos
Vaciar todo
Prusament pc strange quality issue
Hi guys, so first try with pc, for now no warping no bed adhesion problem (i print in enclosure) but i'm not succeding in sorting out this strange periodic layer issue. Nothing that a good sanding can eliminate but i wish to know if is a characteristic o pc or there is something i can do
Thanks a lot
Respondido : 22/03/2021 7:27 am
Topic starter
answered:
RE: Prusament pc strange quality issue
Ok after some troubleshooting i guess i need a pid calibration. Since i haven't had any problems even printing asa at 265, i need to do it at 275 (pc blend recommended printing T)?
Respondido : 22/03/2021 4:18 pm