Benachrichtigungen
Alles löschen
Printed surface is wavy
I used the PLA filament that came with the kit.
It makes a very small periodic sound and waves in time with it.
It prints beautifully when printed very slowly.
The printed surface was clean before.
What could be the cause?
Veröffentlicht : 28/03/2022 6:10 am
You have your first layer Z offset calibrated too low.
Cheerio,
Veröffentlicht : 28/03/2022 10:23 am
iru gefällt das
RE: Printed surface is wavy
The typical signs of a first layer way too low. Print some calibration strips or squares to dial it in.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
Veröffentlicht : 28/03/2022 1:28 pm
iru gefällt das
Themenstarter answered:
RE: Printed surface is wavy
In the First Layer Calibration, I raised the nozzle and got a beautiful print. Thank you very much for your help.
Veröffentlicht : 28/03/2022 1:36 pm