Notifications
Clear all
Print on an older print?
I want to print a part that needs to be oriented in one direction for strength. Once printed, I want to rotate it, affix it to the print bed, then start printing on it again. I would rather the PLA parts be fused by printing vs trying to glue or melt them together. The print has a very nice flat area on it to work with. I'm sure this must have been asked before, but I don't know the terms so I've been unable to find it on my own. The closest thing I can find is people trying to make the Z snaping turn off. (I do know that a multi-color MMU2S would solve my problem, but I don't have one... yet.)
Publié : 28/07/2020 4:36 am