Notifiche
Cancella tutti
Print help
What did I do wrong here? The arms ended up as bunches of "hair" on the sides. Should supports have been used. How to do that. I did scale the model down to 75%.
Postato : 10/08/2023 1:45 pm
RE: Print help
Of course, the two arms must have support for printing.
After all, a 3d printer cannot print in the air.
How to do that can be found here.
Postato : 10/08/2023 2:13 pm
Topic starter
answered:
RE: Print help
Ok thanks.
Postato : 10/08/2023 2:29 pm