Notifications
Clear all
Layer shifting and lifting
Im having intermittent issues with layer shifting and lifting or bowed parts. I am using Atomic Filament PETG with Carbon Fiber. While printing it looks like everything is sticking to the plate and it takes some effort to remove it once cooled, but after I remove it the corners bow up slightly. I am attaching a few pictures of the issues. Nozzle temp 255C and bed temp 80c
Posted : 17/02/2022 11:56 pm
RE: Layer shifting and lifting
Have you checked all of the grub screws on your motor shafts? On could be loose or not against the flat side.
--------------------
Chuck H
3D Printer Review Blog
Posted : 18/02/2022 11:19 am