Clear all

Layer adhesion issue  

New Member
Layer adhesion issue

Hi, I am having issues with some parts breaking quite easily especially using Silk Pla . I have no bed adhesion issues it sticks to the plate quite well. It seems to be only the finer parts that have the issue

I also have issues with vase mode and leaks so I expect its the same issue.

I am also getting some fine stringing so running first layer at 215 and others at 205. Might try to drop temp 5 further but dont want to add to the above issue. 

Any ideas on where to start

Posted : 29/11/2021 1:24 am