Notifications
Clear all
I need your help (some kind of first layer problem)
Hello guys,
I am trying to print these parts on my MK3S with Prusament PLA Jet Black and this keeps happening to every print.
I tryed lowering the nozzle as well as lifting it...same output. If anyone can help me I apreciate it very much.
Rares.
Opublikowany : 25/02/2021 4:18 pm
Topic starter
answered:
RE: I need your help (some kind of first layer problem)
Here are some pictures from after the print was finished
Opublikowany : 25/02/2021 5:06 pm
RE: I need your help (some kind of first layer problem)
Take your live Z lower (closer to the plate)
Opublikowany : 25/02/2021 6:15 pm
Rares polubić