Notifications
Clear all
Help with nylon bridging
I'm trying to tune my printer for some nylon prints which require bridging, so I started with a temperature tower. As you can see from the attached photos, no temperature seems to do very well. I'm wondering if anyone who is having success bridging with nylon can give me the parameters they are using to slice it or offer pointers. Sliced with prusa-slicer and the following parameters:
Filament: MatterHackers Pro nylon Nozzle: 0.6mm Bridging flow multiplier: 0.8 Dynamic Fan Cooling: 0% overlap (bridging) : 100% 25% overlap: 30% 50% overlap: 10%
Posted : 17/10/2023 2:09 am