Notifications
Clear all
Hatchbox Wood Filament Profile
Anyone have a filament profile for the hatchbox wood filament they'd be willing to share or know a good place to find hatchbox profiles in general? I'm using a standard mk3s with a .6mm nozzle if that matters. Thanks
Publié : 22/01/2020 4:12 am
RE: Hatchbox Wood Filament Profile
I print it with PLA settings, 195c and 60c bed. I suggest using 0.2mm layer height (although I’ve printed down to 0.1 as well, it just increase chance for under extrusion) and no less than 0.4mm nozzle.
Publié : 03/02/2020 5:50 am
RE: Hatchbox Wood Filament Profile
Minor caveat. Any filament with fillers (wood, brass, carbon, etc) is going to be more prone to jams.
Stock up on cleaning filament and use it every time you finish with a filled filament.
Publié : 03/02/2020 6:00 pm