Notifications
Clear all

Fillamentum ASA Warping Issues  

  RSS
Kiwi
 Kiwi
(@kiwi-2)
Eminent Member
Fillamentum ASA Warping Issues

Hi community,

 

i am having problems printing ASA from Fillamentum. 

First of all settings and what i have done so far 

Enclosure: Yes (reaches 30°C -35°C)

Nozzle: 255°C (after printing a Temp Tower and best results between 255 and 260)

Bed Temp: 100°C first layer after that 110° (settings kept from the Prusa Slicer)

Speed: 35-45

Satin Sheet (as recommended by the material guide)

Fan: 0-5% 

Brim: 10-15mm

Infill 15-20%

I have an exhaust fan for the fumes that keeps running on 100% from alveo3D maybe i should turn that off while printing ASA

 

Now, i have checked the 3D printing guide from Fillamentum and they recommend printing on PEI. Tho i have seen a few entrys that say with those high temperatures PEI can create bubbles and thats why i kept going with the Satin Sheet as recommended by the prusa guide. What can i do to stop it from warping? Anyone experiences with the filament?

 

Attached what i am trying to print

Posted : 23/01/2023 6:15 pm
Share: