Notifications
Clear all
Changing Print Temperature on the Fly
My MK3S just arrived yesterday and I'm only on my third print with it. Is there a way to adjust the nozzle temp on the fly with the LCD screen? On my old PrintrBot Simple Metal (now dead RIP) I ran it with Simplyfy3D direct from a laptop. It allowed me to adjust temps on the fly. I'm doing a 4 hour print using non-Prusa filament. I used the Prusament default setting of 215C when I sliced but now I'm about 1 hour in and it looks like 215 is a little hot for this PLA and I'd like to lower the temp to 205. Can I do that from the LCD screen without starting over?
Posted : 13/03/2020 12:57 pm
RE: Changing Print Temperature on the Fly
While printing, push the rotary knob to get the menu.
Tune -> Nozzle. Adjust to your liking.
Posted : 13/03/2020 1:35 pm
Topic starter
answered:
RE: Changing Print Temperature on the Fly
Thank you sir.
Posted : 13/03/2020 2:37 pm