Notifications
Clear all
Brim in the new PrusaSlicer 2.2.0
Hi,
I installed the new PrusaSlicer today and have problems with the brim, because it's not touching the printed object and the object starts to warp, but the brims stays in place on the bad.
Thanks.
Opublikowany : 25/03/2020 7:05 pm
RE: Brim in the new PrusaSlicer 2.2.0
Does this explain your problem?
https://github.com/prusa3d/PrusaSlicer/issues/3915
Opublikowany : 26/03/2020 4:30 pm
3Dprintedgr polubić
Topic starter
answered:
RE: Brim in the new PrusaSlicer 2.2.0
@bubnikv
Thanks, that was it. I set the Elephant foot compensation to 0 and the brim connects to the part again.
Strange that it isn't set to 0 as default...
Opublikowany : 27/03/2020 5:57 pm