Notifications
Clear all
Are there additional filaments profiles in Prusa slicer?
Hi
I was trying to find the optimal cost and I tried to find a filament that was tested so I took a look in the Prusa Slicer and there are only 40 profiles. Are there other profiles available for other filaments tested with MK3S printer? For your reference I listed the ones in the slicer for MK3S.
| 1 | ColorFabb HT |
| 2 | ColorFabb PLA-PHA |
| 3 | ColorFabb XT |
| 4 | ColorFabb XT-CF20 |
| 5 | ColorFabb bronzeFill |
| 6 | ColorFabb copperFill |
| 7 | ColorFabb corkFill |
| 8 | ColorFabb nGen |
| 9 | ColorFabb nGen flex |
| 10 | ColorFabb steelFill |
| 11 | ColorFabb woodFill |
| 11 | E3D Edge |
| 12 | E3D PC-ABS |
| 13 | Filatech FilaFlex40 |
| 14 | Fillamentum ABS |
| 15 | Fillamentum ASA |
| 16 | Fillamentum CPE |
| 17 | Fillamentum PLA |
| 18 | Fillamentum Timberfill |
| 19 | Generic ABS |
| 20 | Generic FLEX |
| 21 | Generic HIPS |
| 22 | Generic PETG |
| 23 | Generic PLA |
| 24 | Polymaker PC-Max |
| 25 | PrimaSelect PVA+ |
| 26 | Prusa ABS |
| 27 | Prusa HIPS |
| 28 | Prusa PETG |
| 29 | Prusa PLA |
| 30 | Prusament ASA |
| 31 | Prusament PETG |
| 32 | Prusament PLA |
| 33 | SainSmart TPU |
| 34 | SemiFlex (or Flexfill 98A) |
| 35 | (SemiFlex) or Flexfill 98A |
| 36 | Smartfil Wood |
| 37 | Taulman Bridge |
| 38 | Taulman T-Glase |
| 39 | Verbatim BVOH |
| 40 | Verbatim PLA |
| 41 | Verbatim PP |
Best regards,
Daniel
Posted : 22/03/2020 10:36 pm
1 people liked