Notifications
Clear all

Anyone successfully printed the MK3S upgrade parts?  

Page 2 / 2
  RSS
Russ
 Russ
(@russ)
Active Member
RE: Anyone successfully printed the MK3S upgrade parts?

@timo-m

First post, not sure of protocol, I tried printing the parts using Prusa gcode and let it run after several hours.  Next morning my PINDA had been torn off the print head and I had a massive lump of very hard and strong threads of PETG.  Is there a USA source for these printed parts.  Wait time from Prusa is undetermined.  Thanks Russ

Publié : 23/11/2020 2:11 am
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Anyone successfully printed the MK3S upgrade parts?

@russ-2

WHere are you in the USA? 

there might be a hackspace or maker space near. or a library with a printer, or another prusa owner nearby. 

I have printed parts for folk in the UK.

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Publié : 23/11/2020 2:14 am
Russ
 Russ
(@russ)
Active Member
RE: Anyone successfully printed the MK3S upgrade parts?

@joantabb

Thanks Joan, I'm in Colorado.  I appreciate the response but I really need a quick fix.  I've found a local commercial business that will print for me.  

Publié : 23/11/2020 5:18 am
cwbullet
(@cwbullet)
Membre
RE: Anyone successfully printed the MK3S upgrade parts?

You can also but them off eBay.  

 

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=Prusa+MK3S+parts&_sacat=0

--------------------
Chuck H
3D Printer Review Blog

Publié : 23/11/2020 1:03 pm
Russ
 Russ
(@russ)
Active Member
RE: Anyone successfully printed the MK3S upgrade parts?

@cwbullet

Excellent, never considered eBay, they had exactly what I needed.  Fast and OK price

Publié : 23/11/2020 8:27 pm
cwbullet
(@cwbullet)
Membre
RE: Anyone successfully printed the MK3S upgrade parts?

@russ-2

That is where I buy some replacement parts when I need to keep them running.  I am glad to be of service.   I will usually print them myself, but sometimes my time scale need to keep printing.  

--------------------
Chuck H
3D Printer Review Blog

Publié : 23/11/2020 8:42 pm
Page 2 / 2
Partager :