X Y and Z axis crashing
heres a video of the provlemSo I have received this diy original i3 mk3, when I got it the axis would not home I have tries everything from updating to latest firmware to compiling and modifying my own marlin firmware. Any ideas?
RE: X Y and Z axis crashing
heres a video of the provlemSo I have received this diy original i3 mk3, when I got it the axis would not home I have tries everything from updating to latest firmware to compiling and modifying my own marlin firmware. Any ideas?
that looks like the sensorless homing feature is not working. what firmware are you using in the video? what control board are you using?
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: X Y and Z axis crashing
Firmware in the video is prusa’s latest: 3.11.0 for original prusa i3 mk3.
control board is the einsy RAMBo
RE: X Y and Z axis crashing
Is that stalling the result of a home all axis command?
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: X Y and Z axis crashing
Make sure your X, Y, and Z rods are clean and Lubricated. My MKs3+ would give me a crash error, even though it wasn't crashing.
https://forum.prusa3d.com/forum/postid/630845/
Bob
RE: X Y and Z axis crashing
Yes it is
RE: X Y and Z axis crashing
Thank you for your time! I’ll try that, but when I move them by hand or with the move axis commands they all move smoothly
RE: X Y and Z axis crashing
And thank you for helping me!
RE: X Y and Z axis crashing
Just before I lubricated the rods, they felt dry to the touch, but they moved relatively easily by hand and using a move command.
After lubrication one can see and feel the grease on the rods.
RE: X Y and Z axis crashing
alright